-
熱門關鍵詞：
由于產品型號眾多，網站不能全部展示，更多型號請來電咨詢！Category類 別 Trade-mark牌號 Specification規 格 MeltingPoint熔點(℃) Chemicalcomposition主要成份(%) Application用 途Equivalentto AWS相當AWS Copperzinc銅鋅 L103Wire & rod絲 885-888Cu54 Zn Rem.Brazing of copper, bronze and steel, subjected to low load.釬焊銅、青銅和鋼等受力不大工件 L104Foil箔 890-930Cu57 Mn2Co2 Zn Rem.Brazing of carbide cutting tool.釬焊硬質合金刀具Copperphosphorus 銅磷 L201Cast rod, wire & rod, powder鑄條、絲、粉 710-800P7 Cu Rem.Brazing of copper and copper alloys.釬焊銅及銅合金B(yǎng)CuP-2L204Cast rod, wire鑄條、絲 640-815P5 Ag15Cu Rem.Brazing of copper, copper alloys, silver and molybdenum etc.釬焊銅及銅合金、銀、鉬等金屬。 BCuP-5L205Cast rod, wire & rod, powder鑄條、絲、箔 640-800P6 Ag5Cu Rem.Brazing of copper and copper alloys.釬焊銅及銅合金B(yǎng)CuP-3L207Cast rod, wire & rod鑄條、絲 640-770P7 Ag5Cu Rem.Brazing of copper and copper alloys.釬焊銅及銅合金B(yǎng)CuP-7L209Cast rod, wire鑄條、絲 684-710P7 Ag2Cu Rem.Brazing of copper and copper alloys.釬焊銅及銅合金。 BCuP-6 Silverbase銀基 L302Wire & rod絲 745-775Ag25 Cu40Zn Rem.Brazing of copper, copper alloys, steel and stainless steel etc.釬焊銅及銅合金、鋼及不銹鋼等L303Wire & rod絲 660-725Ag45 Cu30Zn余 Brazing of copper, copper alloys, steel and stainless steel etc.釬焊銅及銅合金、鋼及不銹鋼等BAg-5L303FFlux coated rod涂藥絲 660-725Ag45 Cu30Zn Rem.L303 coated with flux, the same application as L303.外涂釬劑的L303，用途與L303相同 BAg-5L304Foil箔 690-775Ag50 Cu34Zn Rem.Brazing of copper, copper alloys and steel etc.釬焊銅及銅合金、鋼等BAg-6L308Wire & rod絲 779-780Ag72 Cu Rem.Brazing of copper and nickel under vacuum or reducing protective atmosphere.銅和鎳的真空或還原保護氣氛釬焊 BAg-8L312Wire & rod絲 595-605Ag40.Cu.Zn.CdBrazing of copper, copper alloys, steel and stainless steel etc.釬焊銅及銅合金、鋼及不銹鋼等 L313Wire & rod絲 625-635Ag50.Cu.Zn.CdBrazing of copper, copper alloys, steel and stainless steel etc.釬焊銅及銅合金、鋼及不銹鋼等BAg-1aL321Wire & rod絲 615-650Ag56.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.釬焊銅及銅合金、鋼及不銹鋼等BAg-7L323Wire & rod絲 665-755Ag30.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.釬焊銅及銅合金、鋼及不銹鋼等L325Wire & rod絲 645-685Ag45.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.釬焊銅及銅合金、鋼及不銹鋼等 BAg-36L326Wire & rod絲 650-720Ag38.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.釬焊銅及銅合金、鋼及不銹鋼等BAg-34Aluminum base鋁基 L400Cast rod, wire & rod鑄條、絲 577-582Si11.5Al Rem.Brazing of aluminum and aluminum alloys.鋁及鋁合金的釬焊 BAlSi-4L401Cast rod鑄條 525-535Si5 Cu28Al Rem.Brazing of aluminum and aluminum alloys.鋁及鋁合金的釬焊 Tin lead錫鉛 L600Wire & rod絲 183-185Sn60 Sb≤0.8Pb Rem.Soldering of fusible metals and heat-treated part.易熔金屬及熱處理件的釬焊60SnL601Wire & rod絲 183-227Sn18 Sb2Pb Rem.Soldering of copper, copper alloys and galvanized iron plain sheet.銅及銅合金、鍍鋅鐵皮的釬焊。 18SnL602Wire & rod絲 183-256Sn30 Sb2Pb Rem.Soldering of copper, brass, copper alloys and galvanized iron plain sheet.銅、黃銅、鐵、鍍鋅鐵皮的釬焊30SnL603Wire & rod絲 183-235Sn40 Sb2Pb Rem.Soldering of copper, copper alloys, steel and zinc parts.銅及銅合金、鋼、鋅制零件的釬焊40SnL604Wire & rod絲 183-222Sn90 Sb≤0.15Pb Rem.Soldering of copper and steel for food and medicine field.食品、醫療所需銅、鋼等金屬的釬焊90SnL605Wire & rod絲 232-240Ag5 Sn95Soldering of copper and steel for electrical and food field.電器、食品所需銅、鋼等金屬的釬焊L608Wire & rod絲 295-305Sn5.5 Ag2.5Pb Rem.Soldering of copper, copper alloys, steel and stainless steel.銅及銅合金、鋼及不銹鋼的釬焊Nickel base鎳基 L702Powder粉 970-1000Cr7 B3 Si4Ni Rem.Brazing of stainless steel under vacuum or protective atmosphere.不銹鋼真空或保護氣氛釬焊BNi-2Gaswelding氣焊CJ301Copper gas welding flux銅氣焊熔劑Melting point is about 650℃, flux for gas welding and brazing of copper and copper alloys.熔點約650℃，銅及銅合金氣焊或釬焊的助熔劑CJ401Aluminum gas welding flux鋁氣焊熔劑Melting point is about 560℃, flux for gas welding of aluminum and aluminum alloys.熔點約560℃，鋁及鋁合金氣焊的助熔劑Silverbrazing銀釬焊QJ101Silver brazing flux銀釬焊熔劑Brazing flux of copper, copper alloys, steel and stainless steel within 550-750℃.在550-750℃范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑QJ102Silver brazing flux銀釬焊熔劑Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃.在600-850℃范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑QJ102ASilver brazing flux銀釬焊熔劑Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃. Non agglomeration.在600-850℃范圍釬焊銅及銅合金、鋼及不銹鋼。不易結塊QJ112Silver brazing paste flux膏狀銀釬焊熔劑 Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃.在600-850℃范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑QJ103Silver brazing flux銀釬焊熔劑Brazing flux of copper, copper alloys, steel and stainless steel within 550-750℃.在550-750℃范圍釬焊銅及銅合金、鋼及不銹鋼的助熔劑Aluminum brazing鋁釬焊QJ201Aluminum brazing flux鋁釬焊熔劑Brazing flux of aluminum and aluminum alloys within 450-620℃.在450-620℃范圍釬焊鋁及鋁合金的助熔劑QJ207Aluminum brazing flux鋁釬焊熔劑Brazing flux of aluminum and aluminum alloys within 560-620℃.在560-620℃范圍釬焊鋁及鋁合金的助熔劑Hard-surfacing硬面堆焊D 667EDZCr-B-15HRc≥48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part.HRc≥48，耐磨、耐氣蝕、抗氧化。堆焊高爐料鐘、破碎機件D 802EDCoCr-A-03HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as the edge of thermo-cutter.HRc38-47，耐熱、耐蝕、耐磨。堆焊高溫工件如熱剪切刀刃ECoCr-AD 812EDCoCr-B-03HRc45-50. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as internal-combustion engine valve.HRc45-50，耐熱、耐蝕、耐磨。堆焊高溫工件如內燃機閥ECoCr-BD 822HRc≥53. Resistance to Wear and heat, bad shock resistance. Hardfacing of rotating blade wheel of boiler.HRc≥53，耐熱、耐磨，但抗沖擊性差。堆焊鍋爐旋轉葉輪D 832EDCoCr-C-03HRc≥50. Wear and heat resistance. Hardfacing of high temperature part such as hot-rolling guided way.HRc≥50，耐熱、耐磨。堆焊高溫工件如熱軋導軌ECoCr-CD 842EDCoCr-D-03HRc28-38. Corrosion and thermo-fatigue resistance, work harding. Hardfacing of hot forging die.HRc28-38，耐蝕、抗熱疲勞，具有加工硬化性。堆焊熱鍛模 Cast iron鑄鐵 Z 308EZNiPure nickel, excellent general properties. Used to weld thin cast iron part and repair welding machined surface, such as guided way of machine tool.純鎳，綜合性能好。鑄鐵薄件及加工面補焊用，如機床導衛ENi-ClZ 408EZNiFeIron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap.鎳鐵，強度高、塑性好。重要灰鑄鐵及球鐵焊補用，如汽缸蓋ENiFe-ClZ 508EZNiCu-1Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.鎳銅，易加工，但抗裂性較差。不受力的灰鑄鐵加工面及砂眼補焊ENiCu-B Copper alloys銅合金 Cu 107ECuRed copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row.紫銅，耐大氣，海水腐蝕，導電性好。紫銅焊接用，如導電銅排ECuCu 207ECuSiSilicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.硅青銅，耐蝕、強度高。銅、硅青銅及黃銅焊接用ECuSiCu 227ECuSnBTin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.錫磷青銅，耐蝕、強度高。銅、硅青銅及黃銅焊接用ECuSn-CCu 237ECuAlAluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.鋁青銅，耐磨、耐蝕，強度高。銅合金焊接或堆焊用ECuAl-A2Aluminum alloys鋁合金 Al 109TAlPure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum.純鋁，耐蝕性好，但強度不高，純鋁焊接用E1100Al 209TAlSiSilicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.鋁硅，抗裂性好，通用性大。鋁合金焊接用，不宜焊接鋁鎂合金E4043Al 309TAMnManganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys.鋁錳，強度高，耐蝕。鋁合金焊接用E3003Nickel alloys鎳合金 Ni 102ENi-1Pure nickel. Welding and surfacing of nickel and nickel to steel.純鎳，用于鎳、鎳與鋼的焊接與堆焊ENi-1Ni 207ENiCu-7Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel.鎳銅，用于鎳銅、鎳銅與鋼的焊接與堆焊ENiCu-7Hardfacing硬面堆焊 S 101C3 Cr28 Ni4Si3.5 Fe Rem.HRc48-54. Resistance to wear, gas corrosion and oxidation. Hardfacing of bucket tooth and case pump.HRc48-54，耐磨、耐氣蝕、抗氧化。堆焊鏟斗齒，泵套S 111C1 Cr29 W5Co Rem.HRc38-47. Resistance to wear and corrosion at high-temperature. Hardfacing of high temperature and pressure valve.HRc38-47，高溫下耐磨、耐蝕。堆焊高溫高壓閥門ECoCr-AS 112C1.5 Cr29 W8Co Rem.HRc45-50. Resistance to wear and corrosion at high-temperature. Hardfacing of valve and hot-rolling pass.HRc45-50，高溫下耐磨、耐蝕。堆焊閥門，熱軋孔型ECoCr-BS 113C2.5 Cr30 W17Co Rem.HRc≥55. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of screw charging carriage.HRc≥55，高溫下耐磨、耐熱，但抗沖擊性差。堆焊螺旋送料機用S 114C2.5 Cr30 W12Co Rem.HRc≥53. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of three-cone bit.HRc≥53，高溫下耐磨、耐熱，但抗沖擊較差。堆焊牙輪鉆頭ECoCr-CCopperalloys銅 合 金 S 201Sn1 Si0.3Mn0.3Cu Rem.Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper.機械性能好，抗裂性好。紫銅氣焊及氬弧焊用ERCuS 211Si3 Mn1Cu Rem.Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel.機械性能好，銅合金氬弧焊及鋼的MIG釬焊用ERCuSi-AlS 212Sn5 Cu Rem.Wear resistance. Argon arc welding of copper alloys and surfacing of steel.耐磨性好。銅合金氬弧焊及鋼的堆焊用ERCuSn-AS 213Sn8 Cu Rem.Wear resistance. Argon arc welding of copper alloys and surfacing of steel.耐磨性好。銅合金氬弧焊及鋼的堆焊用ERCuSn-CS 214Al7.5 Cu Rem.Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.耐磨、耐蝕。銅合金氬弧焊及鋼的堆焊用ERCuAl-A1S 215Al9 Cu Rem.Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.耐磨、耐蝕。銅合金氬弧焊及鋼的堆焊用ERCuAl-A2S 221Cu60 Sn1 Si0.3Zn Rem.Melting point is about 890℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.熔點約890℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵S 221FCu60 Sn1 Si 0.3Zn Rem.S221 welding rod coated with flux.外涂焊劑的S221焊絲S 222Cu58Sn0.9Si0.1Fe0.8 Zn Rem.Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.熔點約880℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵RBCuZn-CS 222FCu58Sn0.9Si0.1Fe0.8 Zn Rem.S222 welding rod coated with flux.外涂焊劑的S222焊絲RBCuZn-CS 223Cu59 Sn0.6Zn Rem.Melting point is about 900℃. Braze welding of copper, steel and cast iron.熔點約900℃。銅、鋼、鑄鐵釬焊用RBCuZn-AS 224Cu62 Si0.5Zn Rem.Melting point is about 905℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.熔點約905℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵Copperalloys銅合金 S 225Cu48 Ni10Zn Rem.Melting point is about 935℃ and high strength. Braze welding of steel, nickel and carbide alloys.熔點約935℃。高強度,釬焊鋼、鎳及硬質合金用RBCuZn-DS 225FCu48 Ni10Zn Rem.S225 welding rod coated with flux.外涂焊劑的S225焊絲RBCuZn-DS 226Cu60 Sn0.3Si0.2 Zn Rem.Melting point is about 900℃. Gas welding of brass, also braze welding of copper, steel and cast iron.熔點約900℃。黃銅氣焊用，也可釬焊銅、鋼、鑄鐵S 227Cu58Sn0.9Ni0.5Si0.1 Fe0.8Zn Rem.Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.熔點880℃。黃銅氣焊及碳弧焊用，也可釬焊銅、鋼、鑄鐵RBCuZn-BS 229Cu55 Ni6 Mn4Zn余Melting point is about 920℃, high strength. Braze welding of steel, nickel and hard carbide.熔點約920℃。高強度,釬焊鋼、鎳及硬質合金用Aluminum alloys鋁合金 S 301Al≥99.5Good ductility and corrosion resistance. Gas welding and argon arc welding of pure aluminum.塑性好、耐蝕。純鋁氣焊、氬弧焊用ER1100S 311Si5 Al Rem.Corrosion resistance, wide range of usage. Gas welding and argon arc welding of aluminum alloys other than high magnesium alloys.抗裂性好，通用性大。鋁合金氣焊、氬弧焊用。不宜用高鎂合金ER4043S 321Mn1.3 Al Rem.Good corrosion resistance, weldability and ductility. Gas welding and argon arc welding of aluminum alloys.良好的耐蝕性、可焊性及塑性。鋁合金氣焊、氬弧焊用S 331Mg5 Mn0.4Al Rem.Corrosion resistance and high strength. Argon arc welding of aluminum alloys.耐蝕，強度高。鋁合金氬弧焊用ER5183
